No-fines concrete is obtained by eliminating the fine material sand, from the normal concrete mix. The single-sized coarse aggregates are surrounded and held together by a thin layer of cement paste giving strength of concrete.
The advantages of this type of concrete are:
- Lower density.
- Lower cost due to lower cement content.
- Lower thermal conductivity relatively low drying shrinkage.
- No segregation and capillary movement of water.
- Better insulating characteristics than conventional concrete because of the presence of large voids.
No-fines concrete is not suitable for use in reinforced concrete.
£30.00 + VAT
This publication summarises the material used in the design of reinforced and prestressed concrete bridges using Eurocode 2
£55.00 + VAT
This publication assists engineers in understanding the common challenges of building tall.
An all-you-need-to-know guide on the specification of sustainable concrete.
This guide sets out how concrete's attributes can be used to minimise CO2 emissions.
This guide focuses on the use of concrete at Coin Street Neighbourhood Centre and its part in creating a low energy building.
This publication looks at innovation and the learning and proven performance that we can’t afford to leave behind.
This ninth annual report report presents the concrete industry’s sustainability performance in 2015.
This guide focuses on concrete and masonry housing, and presents requirements for Part L1A of the Building Regulations.
Gives likely structural options for a concrete frame, with useful points to note - written by engineers for engineers.
This document provides information on the material and resource efficiency of concrete and masonry.