Structural fire design
A guide to selecting the appropriate method for the design of elements in the fire condition is given in Figure 1 below.
A chapter covering the structural fire design of concrete structures to Eurocode 2, Part 1-2: structural fire design is available in the publication How to Design Concrete Structures to Eurocode 2.
Figure 1: Flow chart showing which fire resistance design method to adopt

Extract from 'How to Design for Concrete Structures using Eurocode 2' (Page 101, Figure 1)
Further guidance on Concrete and Fire from The Concrete Centre
Free
Gives likely structural options for a concrete frame, with useful points to note - written by engineers for engineers.
Free
This publication widens the understanding of post-tensioned floor construction and illustrates the considerable benefits.
Free
This guide sets out how concrete's attributes can be used to minimise CO2 emissions.
Free
This guide focuses on concrete and masonry housing, and presents requirements for Part L1A of the Building Regulations.
£30.00 + VAT
This publication summarises the material used in the design of reinforced and prestressed concrete bridges using Eurocode 2
£55.00 + VAT
This publication assists engineers in understanding the common challenges of building tall.
Free
This guide aims to enable designers to realise their aesthetic aspirations using concrete.
Free
This document provides information on the material and resource efficiency of concrete and masonry.
Free
An all-you-need-to-know guide on the specification of sustainable concrete.
£24.95
The buildings from 70 years of Concrete Quarterly.